Important information about purchasing from the US.
If you see a price that looks too good to be true, it probably is! Beware of counterfeit goods. Check our website to make sure you’re purchasing from an authorized RØDE reseller. For quick reference NO FBA reseller (FULFILLMENT BY AMAZON) on Amazon is authorized. You can view a current list of unauthorized US dealers here.
Caratteristiche principali:
L’NTG5 è un microfono shotgun (o a fucile) piccolo e ultraleggero ideale per registrare nelle situazioni più difficili. Grazie a un design acustico rivoluzionario con delle aperture circolari al posto delle classiche sellette lineari, questo microfono possiede una trasparenza ineguagliabile e un suono più naturale e neutro. La risposta in frequenza è molto controllata, mentre quella fuori asse risulta morbida. Il rumore di fondo è molto basso (appena 10 dBA). L’NTG5 è indicato per svariate situazioni, in particolare per le operazioni di registrazione in loco e di filmmaking difficili, dove è necessario avere un audio eccellente. Nessuna scusa.
L’NTG5 è il sogno di ogni operatore: pesa circa 76 gr ed è lungo poco più di 20 cm, quindi è ideale per le riprese difficili e di lunga durata. Inoltre, è provvisto di uno schema di circuito RF-bias che assicura una performance affidabile in ambienti avversi, con un'eccellente resistenza all'elevata umidità, al freddo rigido e alla polvere. Il microfono perfetto per registrare in loco.
Acoustic Principle | RF-bias condenser |
Active Electronics | RF-bias demodulation |
Polar Pattern | Supercardioid shotgun |
Frequency Range | 20 Hz – 20 kHz |
Frequency Response | 80 Hz - 20 kHz ±3 dB |
Output Impedance | 25 Ω |
Signal to noise Ratio | 84 dB |
Equivalent Noise | 10 dB SPL (A-weighted, as per IEC651) |
Input SPL @ 1% THD | 130 dB SPL (1kHz @ 1% THD, 600 Ω load) |
Power Requirements | 2 mA @ 48V phantom power |
Sensitivity | -23.5 dB re. 1 Volt/Pascal or Better (66 mV @ 94 dB SPL @ 1 kHz) |
Dimensions (L x W x H, mm) | NTG5: 203 x 19 PG2-R:117 x 60 x 240 |
Weight (g) | NTG5: 76g PG2-R: 224g |
Absolutely! The NTG3 is a legendary voiceover mic, which is largely due to the extended low end but also its natural high frequencies. The NTG5 has a flatter low end, but a very similar high frequency response to the NTG3 and will sound fantastic as a voiceover mic.
The active part of the line tube of the NTG5 is the same length as the NTG3, maintaining the directional characteristics of shotgun-style mics.
The NTG5’s conformal coating is a thin layer of protective material that shields the active electronics from any moisture or particles, and the RF-biased circuitry is very resistant to moisture. This makes the NTG5 perfect for use in harsh weather conditions.
The NTG5 builds on the ground-breaking technology of the NTG3 (namely the RF-bias technology, which ensures better immunity to moisture and other environmental factors that can affect performance) with a focus on making it the ideal location recording microphone. First of all, it is much shorter and lighter than the NTG3, which makes it easier to handle on a boom pole. It also features a revolutionary new acoustic design, which delivers a beautifully natural and uncoloured sound; and it has a less pronounced low end response than the NTG3, which is preferable when recording on-location. Lastly, the electronics have been redesigned, resulting in lower self-noise than the NTG3 (10dBA vs 13dBA). They are both great microphones that can be used interchangeably in many scenarios, however, the NTG5 excels as a location recording mic, whereas the NTG3’s pronounced low end is ideal for recording indoors (also great outdoors), and for voiceovers and other applications where rich bottom end is desired.
The NTG5 is incredibly light at just 76 grams, making it a dream for boom operators or filmmakers looking for a compact shotgun that delivers broadcast-grade audio. It has a flatter low end, making it ideal for recording outdoors and on-location. This also effectively provides the preamp with more headroom. Finally, the RF-bias circuitry and conformal coating improve the resilience of all electronic components.
Se hai una domanda o una richiesta di supporto sul NTG5 vai alla nostra pagina dei contatti per trovare o contattare il tuo distributore locale